An icon is a vital air conditioning unit but like all aircon units, it must be maintained. You should keep your aircon working well by performing regular maintenance activities. Most folks simply neglect their iron filters but as a matter of truth, they greatly increase air leakages and dripping in the air conditioner. A dirty air filter clogs the airflow within the evaporator coil causing it to freeze up. This not only destroys the coil on the inside of the aircon but also shortens the electrical life of the iron.
To determine if you have an iron leaking water or aircon leaking water, check the gauge for moisture and if you see that it is getting pretty low, then it is probably time to get the aircon cleaned. If you find that there is a large amount of water dripping from your icon then you should get it serviced right away. Letting water sit in your air-con is just as bad as letting it drip out.
The best way to determine if you have an air conditioner leaking water is to go to your local heating and air company. They are more than likely going to tell you that it is a hose leak. Since most HVAC companies in the US to install and maintain commercial ACs, you may be wondering how they know. It is actually pretty simple. A lot of HVAC contractors in the country like Singapore keep records of all their air conditioner repairs.
They will write down when and where the damage occurred and then fix a date on when the repaired work should have been completed. In addition, they will be able to tell you how extensive the damage was. When it comes to HVAC repair, Singapore just about anywhere in the world, a professional air conditioning and heating company will be able to give you some good advice. However, some contractors in the country like Singapore charge quite a bit for minor repair jobs. While you are looking into the possibility of having your air conditioner repaired in Singapore, get an estimate beforehand.
One of the easiest ways to determine if you have a leaking coil is to locate where the aircon water flowing from the compressor would be draining. You can do this by taking a screwdriver and beginning to loosen the bolts holding down the drain plug. This is similar to loosening and removing a hose to locate a leak. If you see water coming out along the side of the coil, it is most likely a loose or clogged wire.
One other common reason why aircon units might be leaking water is because of dirty air filters. When you clean air filters, you can often prevent iron leaks. However, dirty air filters are almost impossible to detect unless you have access to the actual filter itself. If you have access to the filter, then there is a way to determine if there is a leak. You can stick something into the air filter, such as C-4 or BB, which will allow you to hear a hissing sound. If the air filters are clogged, then the hissing sound will not be present.
Another reason why the air conditioner may be leaking is because the insulation on the unit is dirty. Although you can find air conditioner insulation kits at many retail stores, it is usually best to install it yourself. In order to determine if the insulation is dirty, you can take a screwdriver and start to push on the insulation. If the insulation starts to spring back into place, then you know that it is dirty.
One last possible reason why your AC may be leaking is that the evaporator coils are leaking. If this is the case, then you should have the AC checked by a certified servicing company right away. There are a number of different types of evaporator coils, including ceramic and permanent wave, so having the AC company know about the type of coil being replaced is important.