Residential slap concrete services involve repairs to residential surfaces. The term ‘residential’ is used as it is more commonly used for commercial applications. When a slab of concrete is damaged, residential or commercial, it can be termed as a residential slip. A residential slip is one that has a shallow imprint of some material on the concrete and which may have been damaged due to some reason. Most residential slips occur when there is some impact on the surface, for instance, when a vehicle hits a residential slab.
A residential slip coating is an application made over an existing surface to repair any damage done to the concrete. It is a thin coating that is applied on the affected part of the slab with a liquid and left to dry. Once it dries, it will either peel off or settle down on top of the damaged area and create the imprint. There are several companies offering residential slap concrete services.
There are two methods of applying a residential slip coating. One is known as the roll painting method, the other is the roll coating application method. The first method uses a brush to spread a thin, even layer of the coating over the concrete, while the second application uses a spray bottle. In order to get the best result, both the methods require a continuous application over a considerable period of time.
Apart from residential slip coating, there are other specialized services being offered by residential concrete contractors. Some offer sealing services to seal the concrete after it has been repaired. This is important as no matter how well you treat your concrete, if it becomes damaged in a time while it is still in its usable state, it will need to be sealed. A professional residential contractor who specializes in this field can advise you on the best course of treatment.
Some homeowners, when they want to paint their residential slabs, opt for acrylic paints that are available at local hardware stores. However, it must be ensured that these paints have been approved for use on residential concrete. Acrylic paints are available in various colours, and one should take care not to pick a particular colour that is different from the rest of the house. This could cause a lot of damage, as the homeowner may end up with a house that looks odd. It is advised that residential slabs are left unpainted for the first few years, as the paint will slowly wear off and the house will look strange if the residential slabs are left unpainted. A good painting company should be able to advise you on the best way of maintaining the painting of residential slabs.
Residential cement contractors also offer staining as part of their residential slip coating service. Stained concrete can either be oil-based or water-based, with the former being the better of the two options. The water-based staining agents are more effective at soaking up stains and the oil-based staining agents can be easily diluted with water and left to dry. The residential slip coating is then sanded with fine grit sandpaper, and an acid-free epoxy is sprayed on the surface of the slabs to ensure their effectiveness. There is also a possibility that the acid stain will react with the cement and diminish its effectiveness over time, so it is advised that the acid stain should be removed after the first three years.
Some homeowners prefer to apply a residential slip coating themselves. However, as with any home improvement project, home repairs and home improvements require extra care and attention. One should always do a complete home renovation project, including laying the foundations, before using any residential cement, as there are a number of factors that affect the long-term effectiveness of the residential cement. Some of these factors include: the quality of the concrete slabs used, the condition of the house foundation, the quality of the house drainage system and the presence of any external water or utility lines.
Before deciding on a residential cement repair or residential slip coating service, it is important to make sure you get the services of a company that has ample experience in the field. Look for residential cementing and residential slip coating companies that provide a warranty on the work they do, so that if there are any problems with the residential slip coating project, the homeowner gets help immediately. Moreover, the best way to get started with any residential repair or residential slip coating project is to seek some professional advice. It is possible to get help from a home improvement contractor, a home remodeling contractor or any other experienced contractors in the area who can guide you in the right direction. However, make sure you choose a contractor who is able to handle all your concrete needs.